Comments for My Fiero @ OceanMoon.com

Comment on ECM upgrade (1227730) for stock 2.8 by mludinsk

mludinsk — Thu, 21 Jan 2010 06:14:12 +0000

You wouldn’t have more comprehensive instruction on doing this conversion. Like what you did about the 7th injector , knock sensor and the fan control. I think that the ECM in my 85 SE may have went the way of the DODO and this sounds like a great upgrade.

Comment on About My Project Fiero by ChuckRock

ChuckRock — Wed, 09 Dec 2009 04:23:59 +0000

Well like I had said it would depend on budget how soon I could start. Starting the first I will be getting part of the 10% cut in pay back and we’ll see if we get the variable pay back this next year. So I have not done anything on the car.

I have been spending a lot of time on my son’s 86′ K5 Blazer. He’s in the Army and currently in Germany and I will most likely not get to see him until next summer. I hope to have it done by then, well most of it. It may still need a paint job. Then it will get stored until he out of the service, in 4 years.

I hope by next summer to be getting started back on this project. I still have not made my mind up as to what I am going to put in it. I like the idea of the Ecotec, but I like the sound of a V8. Also the V8 is cheaper to build and there is a lot of support out there for doing that swap. But the V8 in a few hundred pound heavier. That may not be a bad thing if the motor is going to be pushing 3 to 400 hp.

Anyway thanks for visiting.

Comment on About My Project Fiero by ponchogeezer

ponchogeezer — Tue, 08 Dec 2009 18:11:45 +0000

hi ..I am in the tmiddle of a similar 262 swap.I have been playing for several years with little success..do you have pics of the swap?I just sygned into this site so I am not familyar with all its functions.like to hear and contact you on this project.thanks phil kovaleski

Comment on Walt Zettner’s Brake Upgrade by Discount Auto Parts – 4 Ways to Save!

Discount Auto Parts – 4 Ways to Save! — Tue, 01 Dec 2009 08:48:48 +0000

[...] Walt Zettner’s Brake Upgrade | My Fiero @ OceanMoon.com [...]

Comment on Fiero LT1 Frequently Asked Questions by Fiero LT1 Frequently Asked Questions | My Fiero @ OceanMoon.com | Problems Resolved

Sat, 28 Nov 2009 04:09:02 +0000

[...] View post: Fiero LT1 Frequently Asked Questions | My Fiero @ OceanMoon.com [...]

Comment on Golden Gate Fieros by Golden Gate Fieros | My Fiero @ OceanMoon.com - Fiero Proud

Golden Gate Fieros | My Fiero @ OceanMoon.com - Fiero Proud — Wed, 25 Nov 2009 19:01:05 +0000

[...] See the original post here: Golden Gate Fieros | My Fiero @ OceanMoon.com [...]

Comment on Georgia Fiero Club Official Website by plserie

plserie — Thu, 19 Nov 2009 02:42:48 +0000

I have a 84 Indy Pace Car with 38k miles. I was experiencing oil in the air filter. Once the motor was apart I found the rings were not the correct size. I bored the block, installed new pistons, rings, lifters and a mild cam (1500-5000rpm) When I start the motor it knocks untill the engine idle drops, I tried shimming the rockers to tighten up the push rods but didnt fix the problem Any ideas??? Motor was quite prior to the rebuild.
Thanks,
Paul

Comment on mile high fieros by mile high fieros - Fiero Proud

mile high fieros - Fiero Proud — Sun, 23 Aug 2009 10:03:04 +0000

[...] See original here: mile high fieros [...]

Comment on San Diego by San Diego - Fiero Proud

San Diego - Fiero Proud — Wed, 19 Aug 2009 22:57:01 +0000

[...] Go here to read the rest: San Diego [...]

Comment on Georgia Fiero Club Official Website by Georgia Fiero Club Official Website | My Fiero @ OceanMoon.com - Fiero Proud

Fri, 31 Jul 2009 11:49:12 +0000

[...] Excerpt from: Georgia Fiero Club Official Website | My Fiero @ OceanMoon.com [...]